Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace and top up the coolant in the Mini Cooper

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Antifreeze coolant

Today's brief instructions will show us how to replace and top up the coolant in the Mini Cooper. First, we lift the car and begin to bleed the antifreeze, letting it drain into a container for about ten minutes; then we open the hood and unscrew the cap of the reservoir, as shown in the video. At this point, we top up by pouring the appropriate coolant into our radiator, until reaching the maximum level mark on the reservoir, following the video tutorial to the end for completion!

Posted on 1 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to check and refill the coolant in the Mini Cooper?
How to check and refill the coolant in the Mini Cooper?
Mini (2001-2007 / R52, R50, R53) In this video, we can see how to check and top up the coolant in the Mini Cooper, a very simple and quick operation that should be done periodically.…
How to top up the coolant in the Mini Cooper?
How to top up the coolant in the Mini Cooper?
Mini (2007-2014 / R56, R57, R55) In this tutorial we can see how to top up the coolant in the Mini Cooper, an extremely simple and quick operation. First of all, we buy a container o…
How to top up the coolant of a Mini Cooper
How to top up the coolant of a Mini Cooper
Mini (2001-2007 / R52, R50, R53) Before we can begin, we will have to open the front hood of our Mini Cooper. The correct coolant level must be between the "MIN" and "MAX" lines. So …

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos