Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse for the ABS located on the Mini Cooper?

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Fuse box

The fuse related to the ABS on a 2006 Mini Cooper vehicle is located inside the fuse box in the engine compartment, near the battery. The fuse in question is number 1 with 30 Amps. To access and replace the fuse, we must first turn off the vehicle and then open the front hood. Remove the cover of the box and extract the fuse. Insert a fuse with the same amperage as the one removed and then close the cover of the box. Close the hood and start the engine to check that the new fuse is working correctly.

Posted on 18 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse for the cigarette lighter socket located in the Mini Cooper?
Where is the fuse for the cigarette lighter socket located in the Mini Cooper?
Mini (2007-2014 / R56, R57, R55) If the cigarette lighter socket of our Mini Cooper has suddenly stopped working, we can first check the status of the corresponding fuse, whose locat…
Where is the OBD port located on the Mini Cooper R56?
Where is the OBD port located on the Mini Cooper R56?
Mini (2007-2014 / R56, R57, R55) If you don't know where the OBD port of your Mini Cooper R56 is located, don't worry because thanks to the steps described in the following guide, yo…
What is the fuse for the cigarette lighter socket in the Mini Cooper?
What is the fuse for the cigarette lighter socket in the Mini Cooper?
Mini (2014-2023 / F57, F56, F55, F54) If the cigarette lighter socket of our Mini Cooper suddenly stopped working, we can first check the status of the corresponding fuse whose position i…

Other guides you may be interested in

Replacing the Timing Belt on a Land Rover Freelander

Prepare to replace the timing belt on a Land Rover Freelander: lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, and tighten all previously removed components with a socket wrench.

Watch the video!


by ScegliAuto

More videos