Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight of the Mini Countryman

Model: Mini Mini F60, Countryman2 - Years 2017-2023
Part: Tail light

Below we will see the instructions that will allow us to disassemble and replace the rear light of the Mini Countryman. First, we open the rear hatch of the trunk and start removing the side gasket of the headlight; then we remove the side plastic cover to unscrew the screws, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, we remove the headlight from the outside, replacing the bulbs or the entire rear light if necessary; then we reassemble the headlight and make the connection, checking the operation of the brake lights.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Mini Countryman?
How do you replace the rear headlight bulb of the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In order to replace the rear headlight bulb of the Mini Countryman, you need to open the rear hatch so that you can locate the interior panel of the …
How to replace the rear headlight bulb of the Mini Countryman
How to replace the rear headlight bulb of the Mini Countryman
Mini (2010-2016 / R60, Countryman1) Replacing the rear light bulb on a Mini Countryman R60 model vehicle is a simple and quick operation to perform independently. We open the trunk of t…
How to remove the brake light bulb of a Mini Countryman
How to remove the brake light bulb of a Mini Countryman
Mini (2010-2016 / R60, Countryman1) Before we are able to begin, we will have to open the tailgate of our Mini Countryman. Let's start by disengaging and removing the internal side cove…

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos