Do it yourself
Frequently asked questions about cars and motorcycles

How do you easily remove the manual gear knob in a Mini Cooper?

Model: Mini Mini F66 - Years 2023-2026
Part: Transmission

So, if you want to remove the gear knob on a Mini Cooper (especially models R50, R53, R56, etc.), know that it is not complicated, but it takes a bit of determination. First thing: put the car in neutral, pull the handbrake and maybe sit firmly. The knob is not screwed, it is simply pressed in, so no screws to look for. Grab the knob with both hands and pull upwards with strong but controlled force, be careful not to hit your head on the roof! Sometimes it is so stuck that it seems impossible, but persist calmly. If it really doesn't come off, heat it up a bit with a hairdryer to soften it. Once detached, you can replace it or adjust everything to your liking.
Alternatively, the youtuber suggests another "particular" method and recommends using wooden boards as thickness, a wrench to "grab" the knob, leverage and extract the knob. I still suggest you be very careful.

Posted on 13 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Mini (2001-2007 / R53, R50, R52) Follow these steps to remove and replace the gear knob on the manual gearbox of the Mini Cooper. First, get inside the cabin and pull the gear knob u…
Mini (2007-2014 / R55, R57, R56) Let's see in this video tutorial how to remove and replace the gear knob of a Mini Cooper S, in simple steps. First of all we get inside the car and …
Mini (2007-2014 / R55, R57, R56) Today we will explain how to replace the gear knob of the Mini Cooper model R 56. To replace the knob, we need to grab the knob with one hand and wit…

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos