Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the dashboard finish of a Mini One

Model: Mini Mini F66 - Years 2023-2026
Part: Dashboard

In this video, we will see how to remove the dashboard finish of a Mini One: we will need a hook-shaped tool, long enough to enter inside the dashboard itself, in order to remove the satin finish, releasing the clips that hold it anchored to the dashboard. To also remove the part behind the steering wheel, we need to pull the steering wheel as far forward as possible, in order to create space to work, then simply with our hands, we release the clips that hold the finish behind the speedometer in place; as we can see, there are only three clips holding the finish in place.

Posted on 21 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the dashboard of the Mini Cooper r50
How to remove the dashboard of the Mini Cooper r50
Mini (2001-2007 / R53, R50, R52) The guide shows how to remove the dashboard of the Mini Cooper r50. The first operation to perform is to open the left side panel and unscrew the two…
How to replace the third stop on the Mini Clubman f55
How to replace the third stop on the Mini Clubman f55
Mini (2014-2023 / F55, F56, F57, F54) The guide shows how to replace the third stop light bulbs of the Mini Clubman f55. The first step is to open the boot lid and remove the eight T25 To…
How to disassemble the cabin air fan of the Mini Cooper r55
How to disassemble the cabin air fan of the Mini Cooper r55
Mini (2007-2014 / R55, R57, R56) The guide shows how to replace the cabin air fan of the Mini Cooper r55. The first operation to be performed is to remove the finishing panel in the …

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos