Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulb of the Mini Cooper.

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023
Part: Tail light bulb

In a few simple steps, we will see how to disassemble the rear light and replace its bulbs on the Mini Cooper. First, let's open the rear hatch of the trunk and start removing the side plastic cover; then, we detach the two side clips of the light and disconnect the electrical connector of the bulbs, thus extracting the light from the outside, as shown in the video. At this point, we separate the bulb holder from the light fixture and replace any burnt-out bulbs with new ones that have the same fitting; finally, we reassemble the rear light!

Posted on 12 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Mini Cooper?
How do you replace the rear headlight bulb of the Mini Cooper?
Mini (2007-2014 / R55, R57, R56) In order to replace the rear headlight bulb of the Mini Cooper, you need to pry with an object to detach the chrome trim around the headlight. Once t…
How to Replace the Rear Headlamp Bulb on a Mini Cooper
Mini (2007-2014 / R55, R57, R56) Today, you will learn how to replace the rear headlamp bulb on a Mini Cooper independently. To replace the bulb, remove the lower cover located on th…
How do you replace the rear headlight bulb of the Mini Countryman?
How do you replace the rear headlight bulb of the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In order to replace the rear headlight bulb of the Mini Countryman, you need to open the rear hatch so that you can locate the interior panel of the …

How to Remove the Stereo from a Hyundai i20

Want to remove the stereo from your Hyundai but don’t know how? In this video, see how to remove the original stereo from your car. First, remove the dashboard cover plastics using a plastic tool, then detach the central frame of the stereo (where the air vents are located) along with the related clips of the control buttons. Once the stereo is free from constraints, unscrew the fastening screws on its sides. Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, proceed in reverse.

Watch the video!


by ScegliAuto

More videos