Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. : Spider

How to Reset the Service Light on a MINI Spider

Model: Mini Spider R58, R59 - Years: 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

To reset the service light on a MINI Spider (R58), insert the key and turn on the instrument panel without starting the engine. Press and hold the trip meter reset button, located at the bottom right of the instrument panel, for about ten seconds until the maintenance menu appears.

Then, use the button at the end of the left steering column to scroll through the various service items until you select the one you wish to reset. When the relevant service appears, press and hold the reset button again until the display shows the reset request.

Release the button and press it again for about three seconds to confirm the operation. The new maintenance interval will then be stored.

Turn off the ignition and turn it back on to verify that the warning has been cleared correctly.


Posted on 10 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mini Cooper
How to Reset the Service Light on a Mini Cooper
Mini (2001-2007 / R53, R50, R52) Resetting the service light on a Mini Cooper produced from 2000 to 2010 is a straightforward task that you can perform independently, aided by this b…
How to Reset the Service Light on a Mini Cooper?
How to Reset the Service Light on a Mini Cooper?
Mini (2023-2026 / F66) You can clear the Service light displayed on the instrument cluster of the Mini by navigating through the menu shown on the display in the centre of …
How to Reset the Service Light on a Mini Cooper
How to Reset the Service Light on a Mini Cooper
Mini (2007-2014 / R57, R56, R55) To reset the service light on a Mini Cooper, insert the key and turn on the instrument panel without starting the engine. Press and hold the trip odo…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos