Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Bonnet of the Mini Cooper?

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we will see how to open the bonnet of the Mini Cooper, a very simple operation that does not differ from the standard procedure of most vehicles. First, unlock the latches using the remote control, then open the driver's door, locate the lever in the lower left area of the dashboard, and pull it towards you. Next, move to the front of the vehicle, locate the second lever on the right inner side of the bonnet, and press it. At this point, simply lift the bonnet and support it with the appropriate prop rod.


Posted on 7 November 2026 by ScegliAuto


Related tutorials

Mini (2001-2007 / R53, R50, R52) This section provides step-by-step instructions on how to properly open and close the bonnet of the Mini Cooper. First, open the front door of the ve…
Mini (2001-2007 / R53, R50, R52) In this short video, follow these simple steps to open the bonnet of the Mini Cooper. First, open the front door and pull the lever located under the…
Mini (2007-2014 / R57, R56, R55) Start by opening the driver's front door of your Mini Cooper by pulling the opening handle. Next, pull the handle located near the door hinge twice. …

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos