Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel pump replacement on Mini

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Fuel pump

If we have draft problems, a solution could be to replace the fuel pump, let's see. We disconnect the battery cables, then, we remove the seats from the rear seats of the car. Unscrew the tightening screws of the black metal cap with a socket wrench, remove it from its seat, cover the perimeter with absorbent paper to stop liquid leaks. Disconnect the power supply terminals and the liquid circulation tubes. We pull the fuel pump out from inside the tank. We check the operation; let's replace it if it doesn't work.

Posted on 22 April 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Mini Cooper
Replacement of the fuel pump of the Mini Cooper
Mini (2007-2014 / R56, R57, R55) Today's step-by-step instructions will show us the process of disassembling and replacing the fuel pump of the Mini Cooper. First, we lower the front…
How to replace the fuel pump in your Mini
How to replace the fuel pump in your Mini
Mini (2001-2007 / R52, R50, R53) In today's video we see how to disassemble and remove the fuel pump in the first series of the modern Mini, the R50 and its derivatives. We proceed b…
How do you replace the water pump of the Mini?
How do you replace the water pump of the Mini?
Mini (2007-2014 / R56, R57, R55) It will be possible to replace the water pump of the Mini by opening the hood to access the components inside the engine compartment: on the left sid…

Other guides you may be interested in

How to Remove the Third Brake Light from a Renault Clio

In this video, we will see how to remove the third brake light from a Renault Clio. First, open the boot lid and remove the plastic rivets with a screwdriver, then close the boot. Extract the third brake light from the metal of the boot lid using your hands. Once the piece is removed from its housing, disconnect the power connector and attach the new third brake light. After fitting the bulbs, insert the piece back into the boot lid and secure it with the plastic rivets. Finally, check the correct operation of the lights after turning on the instrument panel.

Watch the video!


by ScegliAuto

More videos