Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R50, R52, R53
- Years 2001-2007 Damaged headlight bulbs on a Mini? Let's replace them with new bulbs. We open the trunk lid, remove the plastic panel of the side trim (unscrew the tightening screws). Once the screws have been unscrewed, we remove the rear light from its housing and replace the damaged bulbs with new ones (size and voltage equal). Finally we go to reassemble the lighthouse with attached screws. We screw in the fixing screws of the headlight, close the cover of the interior trim of the trunk. We check the bulbs whether or not they work in the rear light. We disassemble the lighthouse again if we have problems.
Posted on 30 November 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |