Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Mini Clubman rear light

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Tail light

In this video tutorial we will see how to remove the rear light of a Mini Clubman. First of all we open the two doors of the trunk and remove the side plastic cover of the headlight concerned: then we remove the plastic screws that hold the light and with the help of a lever we go to release it from the outside, as shown in the video. At this point we are going to disconnect the electrical connectors of the bulbs and finally extract the light; now, if we want, we can replace the bulbs. Apply the reverse procedure to reassemble the light.

Posted on 22 December 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the seatbelt of the Mini Clubman.
How to remove the seatbelt of the Mini Clubman.
Mini (2014-2023 / F57, F56, F55, F54) In this guide, we will see the main instructions that will allow us to disassemble and replace the front seat belts of the Mini Clubman. First, we ge…
How to replace the brake light bulb on the Mini Clubman
How to replace the brake light bulb on the Mini Clubman
Mini (2014-2023 / F57, F56, F55, F54) The guide shows how to replace the brake light bulbs of the Mini Clubman. After securing the vehicle and opening the rear doors, it is necessary to u…
How to open the rear door of a Mini Clubman from the inside
How to open the rear door of a Mini Clubman from the inside
Mini (2014-2023 / F57, F56, F55, F54) In this video we can see how to open the rear trunk door of a Mini Clubman that is stuck from the inside. As with all cars that have this problem, we…

How to Remove the Stereo from a Hyundai i20

Want to remove the stereo from your Hyundai but don’t know how? In this video, see how to remove the original stereo from your car. First, remove the dashboard cover plastics using a plastic tool, then detach the central frame of the stereo (where the air vents are located) along with the related clips of the control buttons. Once the stereo is free from constraints, unscrew the fastening screws on its sides. Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, proceed in reverse.

Watch the video!


by ScegliAuto

More videos