Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light on Mini

Model: Mini Mini F57, F56, F55, F54 - Years 2014-2023
Part: Fog lights

How to replace the rear fog light bulb? Let's see how the bulb is replaced from inside the Mini headlight. We unlock the plastic in the lower part of the rear bumper, we arrive at the fog light placed in conjunction with the bumper. After removing the headlight, we detach the lamp holder, remove the damaged bulb and mount a new one (same size and voltage). We mount the plastic spotlight inside the car bumper. We test the correct operation of the fog lights with the appropriate operating knobs located in the passenger compartment.

Posted on 8 August 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fog light bulb on the Mini Cooper
How to replace the fog light bulb on the Mini Cooper
Mini (2010-2016 / Countryman1, R60) Intervening with a timely replacement of the fog lights is very important as it reduces any inconvenience and dangers when driving on days with a lot…
How to Replace the Rear Fog Lights on the Mini Cooper
How to Replace the Rear Fog Lights on the Mini Cooper
Mini (2007-2014 / R56, R57, R55) To replace the rear fog lights on the Mini Cooper, follow these steps: 1) Disconnect the battery. 2) Gently pry the red side tabs, being careful not …
How to turn on the fog lights on a Mini Cooper.
How to turn on the fog lights on a Mini Cooper.
Mini (2014-2023 / F57, F56, F55, F54) Let's see how to turn on the fog lights on a Mini Cooper. First, we need to make sure that the headlight selector is either on automatic or on low be…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos