Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Engine Warning Light on the Mini Countryman

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Warning light – error code

In this video, you will see the procedure necessary to reset the engine warning light that appears on the instrument cluster of the Mini Countryman, as well as the Paceman and Cooper. First, get into the vehicle and connect your diagnostic tool to the OBD port of your car; then select the make, model, and engine type to check for errors present in the ECU. At this point, proceed with the reset of the engine light, waiting a few seconds for the light to turn off on the instrument cluster, as illustrated in the video!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2017-2023 / Countryman2, F60) To reset the "Service" light on a Mini Countryman, start by turning on the instrument panel without starting the engine. Press the button located bel…
Mini (2010-2016 / Countryman1, R60) Resetting the service light on a Mini Countryman is very simple. Follow these steps. First, insert the key and turn on the ignition, but do not start…
Mini (2017-2023 / Countryman2, F60) Let's see in this guide the instructions that will allow us to reset the airbag warning light on the Mini Countryman. First, let's get inside the veh…

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2014-2023 - What does the warning light with an exclamation mark inside a triangle indicate in the Mini Cooper? Read answer
    • Mini 2010-2016 - How do you reset the brake wear warning light on the Mini Countryman? Read answer
    • Mini 2001-2007 - What is the meaning of the warning lights on a Mini Cooper? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos