Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R55, R56, R57
- Years 2007-2014 This guide will show us how to replace the car stereo in a Mini R56. Let's start by removing the panel to the right of the speedometer, removing the pieces on the sides of the glove box, behind which we will find some bolts to remove. Once removed, we will have to remove the piece of plastic to the right and left of the panel, as shown at minute 2: 40. Now we will also have to remove the panel behind the steering wheel in the same way. At this point we will have to unscrew two screws that are inside the air vent: once this is done we can remove the gasket around the speedometer as shown at 4:05. Now we will have to go to the pedal area; immediately above we will have a panel held in place by 3 screws, which we will have to unscrew. The next step will be to extract, by simply pulling them, two panels on the sides of the central console; and it is precisely on the central part that we will have to concentrate now, extracting a panel under the controls, 2 screws in the cup holder and a screw in the back of the armrest. This will allow us to extract all the central part and the control panel, as shown at 6: 50. The last operation before being able to remove the radio will be to extract the last two panels left on the sides and the two screws of the cd player. . Now you can take out the radio to replace it.
Posted on 28 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |