Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of the Mini Cooper

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Body

Let's see in this short video the guide that will allow us to open the bonnet of the Mini Cooper, following these simple steps. First we open the front door and start pulling the lever that we find under the steering wheel, on the plastic pillar; after which we go to look for the opening lever of the bonnet, which we find on the right; let's pull it up to open the bonnet, held by the hydraulic pistons, as shown in the video. At this point, let's push the bonnet down, applying some pressure to close it perfectly!

Posted on 17 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open the engine hood of the Mini Cooper
How to open the engine hood of the Mini Cooper
Mini (2001-2007 / R52, R50, R53) Below we will see step by step instructions on how to properly open and close the engine hood of the Mini Cooper. First, open the front door of the c…
How to open the front hood of a Mini Cooper
How to open the front hood of a Mini Cooper
Mini (2007-2014 / R56, R57, R55) Let's start by opening the driver's front door of our Mini Cooper by pulling the relative opening handle. After that, we will have to go and pull the…
How to open the hood of the Mini Cooper
How to open the hood of the Mini Cooper
Mini (2001-2007 / R52, R50, R53) .. Today's steps will show us how to open the hood of the Mini Cooper, following the instructions below. First, we open the front driver's.. …

Other guides you may be interested in

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos