Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the antenna in Mini Cooper?

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Antenna

The Mini Cooper antenna is supported by a single screw installed under the roof bodywork. To replace the antenna we must therefore work our way to access this screw by removing some parts inside the passenger compartment. Specifically, we have to disassemble the plastic rear pillars, installed by interlocking, and the handle placed high above the window. Now we just have to remove the two rear clips that support the roof of the car and unscrew the screw located at the base of the antenna. We remove the old antenna and with the same procedure, but done in reverse, we install the new one.

Posted on 26 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the antenna of the Mini Cooper.
How to remove the antenna of the Mini Cooper.
Mini (2010-2016 / R60, Countryman1) Removing the antenna from the Mini Cooper S R56 is a very simple operation that can be carried out independently. Today, with the help of this very s…
How to replace the antenna base of the Mini Cooper.
How to replace the antenna base of the Mini Cooper.
Mini (2007-2014 / R55, R57, R56) Today we will see the procedure that will allow us to disassemble and replace the base of the Mini Cooper antenna, following the instructions below. …
How do you remove the antenna on the Mini Cooper R56?
How do you remove the antenna on the Mini Cooper R56?
Mini (2007-2014 / R55, R57, R56) Let's see in this video how to disassemble the antenna and its base on the Mini Cooper R56, following these simple steps. First we open the boot lid …

Other guides you may be interested in

How to Fit Seat Covers on a Renault Clio

How do you fit seat covers on your Renault Clio? Watch this video for guidance. First, move the seat forward and raise the seat base, then remove the headrest from the backrest. Slide the seat cover from the top down over the backrest, removing any controls on the side of the seat if necessary by pulling them towards you. After fitting the upper seat cover, ensure it is around the headrest seals. Fit the lower seat cover on the base, pull the springs with the metal clips and secure them. Use plastic spatulas to assist with the fastening.

Watch the video!


by ScegliAuto

More videos