Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on the Mini Countryman

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Warning light – error code

In this video tutorial, you can see how to perform the service reset on the Mini Countryman by following a few simple steps that will guide you towards proper management of your vehicle. First, before proceeding with the reset, carry out the scheduled maintenance for your vehicle. Next, get in your car, engage the handbrake, turn on the ignition while keeping the engine off; at the bottom right of the speedometer, there is a button for the mileage, press and hold it for about 1 second until the service reset options appear on the screen. Using the button on the left control lever, scroll to select "reset service". Keep the reset button pressed until the reset is complete and the reset message disappears, then release the button. Press the reset button for another three seconds.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2017-2023 / Countryman2, F60) To reset the "Service" light on a Mini Countryman, start by turning on the instrument panel without starting the engine. Press the button located bel…
Mini (2010-2016 / Countryman1, R60) Resetting the service light on a Mini Countryman is very simple. Follow these steps. First, insert the key and turn on the ignition, but do not start…
Mini (2017-2023 / Countryman2, F60) In this brief guide, we will go through the steps necessary to reset the oil change service light on a Mini Countryman. First, get into the vehicle a…

    Frequently Asked Questions

    • Mini 2014-2023 - What does the warning light with an exclamation mark inside a triangle indicate in the Mini Cooper? Read answer
    • Mini 2010-2016 - How do you reset the brake wear warning light on the Mini Countryman? Read answer
    • Mini 2001-2007 - What is the meaning of the warning lights on a Mini Cooper? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos