Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the brake fluid reservoir located in the Mini Cooper?

Model: Mini Mini F57, F56, F55, F54 - Years 2014-2023
Part: Brake system

In this video we can see where the brake fluid reservoir is located in the Mini Cooper and how to proceed to access it, useful in case we need to check the level and top up. As shown, it is positioned in the upper area of the engine compartment, just in front of the windshield on the driver's side. To access it, it will be necessary to disassemble the left plastic cover, removing all the relative bolts and screws. Once this is done, we can remove the cap from the tank and carry out all the necessary checks. Finally, avoid any leakage of liquid as it is a highly corrosive substance.

Posted on 29 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake fluid in the Mini Cooper.
How to replace the brake fluid in the Mini Cooper.
Mini (2010-2016 / Countryman1, R60) Replacing the brake oil on a Mini Cooper vehicle is a very simple operation that can be done independently. After purchasing the brake oil online or …
Where is the brake fluid reservoir located in the Mini Cooper?
Where is the brake fluid reservoir located in the Mini Cooper?
Mini (2014-2023 / F57, F56, F55, F54) After a few years of using our Mini Cooper we will have to check the brake system fluid level and, if necessary, top up. In this video we can see whe…
Check and Top Up Antifreeze Level in Mini Cooper
Check and Top Up Antifreeze Level in Mini Cooper
Mini (2007-2014 / R56, R57, R55) To check the antifreeze level in your Mini Cooper, follow these steps: 1) Open the bonnet. 2) Locate the antifreeze reservoir in the engine bay. 3) U…

Other guides you may be interested in

Replacing the Timing Belt on a Land Rover Freelander

Prepare to replace the timing belt on a Land Rover Freelander: lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, and tighten all previously removed components with a socket wrench.

Watch the video!


by ScegliAuto

More videos