Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the passenger airbag on a Mini Cooper.

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Airbag

In this short video tutorial, we can see the simple procedures to follow to deactivate the passenger airbag on a three-door Mini Cooper. The on/off switch for activating or deactivating the passenger side airbag is located on the right side of the dashboard where the door closes, behind the air vent. Once we have located the switch, we need to remove the emergency key from the remote control using the appropriate release button, and insert it into the switch. Then, we rotate the key clockwise to select the "off" setting to complete the task.

Posted on 28 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the passenger airbag of the Mini Countryman.
How to deactivate the passenger airbag of the Mini Countryman.
Mini (2010-2016 / Countryman1, R60) Below we will see the instructions that will allow us to deactivate the front passenger airbag of the Mini Countryman. First, we open the front passe…
How to deactivate or activate the passenger airbag of the Mini Cooper
How to deactivate or activate the passenger airbag of the Mini Cooper
Mini (2007-2014 / R56, R57, R55) We see in this guide the instructions on how to deactivate or activate the passenger airbag of the Mini Cooper, following these simple steps. First w…
How to remove the steering wheel airbag of a Mini Cooper
How to remove the steering wheel airbag of a Mini Cooper
Mini (2001-2007 / R52, R50, R53) Before we are able to start, we will have to disconnect the battery of our Mini Cooper, so as to work safely. We start by sitting in the driver's sea…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos