Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter of the Mini Cooper.

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Cabin air filter

The replacement of the cabin air filter of the Mini Cooper is a very simple operation that can also be done independently. The first step to replace the cabin filter with a new one is to remove the plastic side cover located under the glove compartment. The second step is to remove the filter protection panel in order to extract it. The third and final step is to insert the new filter into the housing, close the cover, and reassemble everything. Note: the replacement of the cabin air filter should be done every six months.

Posted on 7 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter on a Mini Cooper
How to replace the cabin air filter on a Mini Cooper
Mini (2007-2014 / R56, R57, R55) Before we begin, we will need to open the front passenger door of our Mini Cooper. So let's start by unhooking the clips that secure the lower cover …
Replacement of the cabin air filter of the Mini Cooper S
Replacement of the cabin air filter of the Mini Cooper S
Mini (2001-2007 / R52, R50, R53) In a few simple steps, we will see how to disassemble and replace the cabin air filter of the Mini Cooper S. First, we open the front passenger side …
How to replace the cabin filter in the Mini Cooper?
How to replace the cabin filter in the Mini Cooper?
Mini (2007-2014 / R56, R57, R55) In this tutorial, we can see how to replace the cabin filter in the Mini Cooper R56, an extremely simple and quick operation. First of all, let's pos…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos