|
Do it yourself
| |||
| ||||
Why does the brake fluid level decrease?
Model: Mini Mini
R55, R57, R56
- Years 2007-2014
In this video, we see why the brake fluid level drops: excluding any system failures, for which you should immediately go to a mechanic, there is a technical reason why the brake fluid level drops: the brake pads thin out over time and the level needs to be restored. This should be checked periodically and should be replaced at least every two years. If the brake pads are very worn, the oil level can drop quickly, and to find the appropriate type of fluid, marked with the label DOT, it is advisable to consult the owner's manual. The reservoir is located in the engine compartment, and the level is marked on the reservoir itself, do not exceed the maximum level. The fluid is highly corrosive, so be very careful not to stain painted parts. If the level were to drop again, then there is a problem with the braking system that needs to be checked by a mechanic.
Posted on 20 December 2023 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2023-2026 /
F66)
Let's see how to monitor the maintenance status of our Mini from the on-board computer: from the multimedia screen we select "vehicle info" and then …
Mini
(2014-2023 /
F55, F56, F57, F54)
In this video we can see how to check the brake fluid and reset the instrumentation on a Mini Clubman: in fact, once the car is started we have an ac…
Mini
(2014-2023 /
F55, F56, F57, F54)
After a few years of using our Mini Cooper we will have to check the brake system fluid level and, if necessary, top up. In this video we can see whe…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Front Bumper on a BMW 3 Series
This simple operation will be illustrated in this short video guide. As the first step, raise the hood to access and remove the bolts securing the top of the bumper. Next, remove the bolts and clips that attach the inner fender to the rear of the bumper. This operation will need to be repeated on both sides. Also, remove the screws that secure the bottom of the bumper to the lower engine cover. Now, just pull the bumper away, being careful to disconnect the connectors at the back. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |