Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Mini One?

Model: Mini Mini R53, R50, R52 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Mini One, turn on the ignition by rotating the key in the ignition switch: once it is on, press and hold the button located on the right side of the instrument panel until the "rST" message starts to flash. When the light is flashing, release the button and then press it again; this will completely reset the Service light and restore the maintenance interval.

Finally, turn off the ignition by rotating the key.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How do you reset the Mini's Service light?
How do you reset the Mini's Service light?
Mini (2001-2007 / R53, R50, R52) To reset the Service light on the Mini One, you will need to turn on the instrument panel by turning the key inside the ignition block: once it is tu…
How do you reset the Service light in the Mini F57?
How do you reset the Service light in the Mini F57?
Mini (2014-2023 / F55, F54, F56, F57) It is noted that the procedure for resetting the Service light, shown in this video guide, is generic in nature; in fact, it is standard among variou…
Service Reset on a Mini Clubman
Service Reset on a Mini Clubman
Mini (2007-2014 / R57, R56, R55) How to reset the service on a Mini Clubman? Let's see how to reset the service light. Turn on the instrument cluster and check the warning light. Pre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos