Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sport and DCS Switches

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Dashboard

Start this guide by removing the gear lever support. Once done, fully slide it out. Next, unscrew the cup holder located at the rear of the cabin. Now proceed to remove the handbrake by disconnecting the cables underneath the support. After removing it, unscrew the front screws to gain more space for removing the switches. Move to a table for more room. First, unscrew the screws that secure it to the support. Once this is complete, reassemble all the parts, and the job is finished.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the electric windows on a Mini R50.
How to reset the electric windows on a Mini R50.
Mini (2001-2007 / R53, R50, R52) In this video, we see how to reset the power windows on a Mini R50: it may be necessary to do this if for any reason we have disconnected the battery…
How to remove the cylinder head of a Mini Cooper
How to remove the cylinder head of a Mini Cooper
Mini (2001-2007 / R53, R50, R52) Before we begin, we will need to open the hood and make sure the engine is cold. If this is not the case, we will have to wait for it to cool down. T…
Disassembly of the rear seats of the Mini Cooper
Disassembly of the rear seats of the Mini Cooper
Mini (2007-2014 / R55, R57, R56) The following steps will show us how to disassemble and remove the rear seats of the Mini Cooper, following the instructions below. First, we open th…

How to Remove the Spark Plugs from a Mercedes C-Class

Want to remove the spark plugs from your Mercedes? Let's see how to do it in this video. Pull the hood release lever and lift the front hood, then secure it. You will find the coils under the metal soundproofing panel covering the engine. Remove the panel with a socket wrench and take it off. Disconnect the coils by hand, then use your socket wrench to unscrew the spark plugs until they come out of the cylinder head. Take the new spark plugs and insert them into the cylinder head, connect the respective power connectors, and reinstall the soundproofing panel.

Watch the video!


by ScegliAuto

More videos