Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Handbrake Lever Replacement for Mini

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Parking brake

To replace the handbrake lever in a Mini, follow these steps: 1) Remove the gear surround. 2) Remove the gear gaiter and gear knob. 3) Remove the screws in the front and rear cup holders. 4) Remove the rear cup holder. 5) Remove the handbrake gaiter. 6) Carefully lift and remove the centre tunnel, taking care with the electrical connections. 7) Disconnect the electrical connections. 8) Remove the bolts from the plastic frame of the centre tunnel. 9) Free the handbrake from the bolts anchoring it to the chassis. 10) Disconnect the steel cables connecting the handbrake lever to the brakes. 11) To reinstall the lever, proceed in reverse order.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handbrake Lever of a Mini
How to Remove the Handbrake Lever of a Mini
Mini (2001-2007 / R52, R50, R53) In this video, learn how to remove the handbrake lever of a Mini. Use a screwdriver to remove the trim around the gear lever, then take off the lever…
Mini Cooper handbrake cover replacement
Mini Cooper handbrake cover replacement
Mini (2001-2007 / R52, R50, R53) In this video tutorial we will see how to remove and replace the handbrake cover on a Mini Cooper first and second series, in the JCW version. First …
How to adjust the handbrake in the Mini Cooper?
How to adjust the handbrake in the Mini Cooper?
Mini (2001-2007 / R52, R50, R53) In this tutorial, we can see how to adjust the handbrake in the Mini Cooper, an extremely simple and quick operation. First of all, we park the vehic…

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos