Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mitsubishi Lancer -

Mitsubishi Lancer (2007-2020 / mk 9)

Mitsubishi Lancer (2007-2020 / MK 9)
How do you reset the tire pressure warning light on the Mitsubishi Lancer?
To reset the tire pressure warning light of the Mitsubishi Lancer, you need to inflate the tires to the recommended pressure value: this value is indicated on …Read all…
Posted on 30 October 2024 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
How to reset the tire pressure warning on the Mitsubishi Lancer
In this guide, we will see the instructions necessary to reset the tire pressure warning on the Mitsubishi Lancer; before performing the reset, it is necessary …Read all…
Posted on 14 October 2024 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
How to Reset the Tyre Light on a Mitsubishi Lancer
If the tyre light on your Mitsubishi Lancer (2007-2014) continues to illuminate on the instrument cluster despite no punctures or pressure loss, you must …Read all…
Posted on 10 September 2026 by ScegliAuto
Mitsubishi Lancer (2007-2020 / MK 9)
How to Reset the Tyre Warning Light on a Mitsubishi Lancer
To reset the tyre warning light on a Mitsubishi Lancer, after checking the correct tyre pressure against the manufacturer's recommendation, turn on the …Read all…
Posted on 17 August 2026 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (2) Battery (3) Spark plugs (2) Key (2) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Headlight (1) Tail light (1) Air filter (3) Cabin air filter (2) Fuel filter (1) Oil filter (1) Clutch (1) Accessory kit (6) Light bulb (2) Headlight bulb (5) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (2) Engine (1) Clock (2) Door trim panel (1) Front bumper (2) Rear bumper (3) Brake pads (1) Shift knob (1) Fuel pump (2) Power window switch (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (6) Suspension system (1) Warning light – error code (4) (4) Service warning light (12) Fuel cap (1) Blower motor (1)

How to set the clock on the Opel Zafira

Setting the clock to the current Italian time on an Opel Zafira model B vehicle is a very simple operation, which can also be done independently thanks to our short instructional video. The first thing to do is to turn on the instrument panel and then press the SETTING button, located on the central dashboard. Once inside the menu, use the buttons to navigate to the clock setting. Change the hours and minutes and restart the instrument panel. If the clock is not updated, a diagnosis may be necessary at the radio or vehicle control unit.

Watch the video!


by ScegliAuto

More videos