Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Mitsubishi Lancer?

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part:

To reset the tire pressure warning light of the Mitsubishi Lancer, you need to inflate the tires to the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires have been inflated, you will need to connect a diagnostic tool to the vehicle's OBD port: this can be found on the lower left side of the dashboard, next to the steering column. By doing this, you can follow the procedure on the scanner to remove the warning light and then disconnect it.

Posted on 30 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Mitsubishi Lancer
How to Reset the Tyre Warning Light on a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) To reset the tyre warning light on a Mitsubishi Lancer, after checking the correct tyre pressure against the manufacturer's recommendation, turn on t…
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If you want to access the OBD port of your 2008 Mitsubishi Lancer, simply read this guide and follow the steps described. First, enter the car from t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos