Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the inspection on a Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years 2010-2023
Part: Service warning light

In today's video, we will see how to reset the inspection on a first-generation Mitsubishi ASX. With the injection still off, we press the info button, located on the dashboard to the right of the speedometer, to activate the information display. Then, we continue to press the info button to change the screens on the display until we see the screen related to the car's maintenance interval as shown in the video. Once we do this, we press and hold the info button until the text on the display starts flashing, then release the button and press it again to reset and complete the task.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
How to reset the service indicator light on the Mitsubishi ASX
How to reset the service indicator light on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Let's find out the necessary information on how to reset the service light of the Mitsubishi ASX. First of all, get into the car and start the instru…
How to reset the engine oil light on the Mitsubishi ASX
How to reset the engine oil light on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) After performing the routine maintenance check, it is necessary to reset the service light; let's see the procedure on the Mitsubishi ASX. First, we …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos