Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan in the Mitsubishi Lancer?

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, we can see how to replace the cabin fan in the Mitsubishi Lancer, an extremely simple and quick operation. First of all, let's make sure the key is not inserted, then we position ourselves on the passenger side and remove the lower cover of the glove compartment by taking out all the indicated plastic rivets.

Next, we disconnect both the fan power connector and the duct, unscrew the three fixing screws, and extract the fan itself from the housing. At this point, all that remains is to insert the replacement part and reassemble everything by following the reverse procedure.


Posted on 17 January 2026 by ScegliAuto


Related tutorials

Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …
What is the Fuse Diagram for the Mitsubishi Lancer?
What is the Fuse Diagram for the Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) In this video, you will see where the fuse boxes are located in the Mitsubishi Lancer and their respective diagrams, useful in case you need to check…
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Where to Find the OBD Port of the 2008 Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If you want to access the OBD port of your 2008 Mitsubishi Lancer, simply read this guide and follow the steps described. First, enter the car from t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos