Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Outlander
  6. : How to replace the knob on the Mitsubishi Outlander

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Gear Shift Knob
Operation: How to replace the knob on the Mitsubishi Outlander

Do you want to replace the gear knob on a Mitsubishi Outlander? Let's see in this video how to proceed. Disconnect the frame of the leather cap with a plastic lever (if we need to replace it); unscrew the knob until it is removed from the shift rod. To carry out the assembly, take the new knob and insert it into the rod on the central tunnel, tighten it in the rod (place the knob with the numbers in a horizontal position); we mount the new leather cap with the clips (if previously disassembled). Finally we test with the movement of the rod placed in the central tunnel the correct assembly of the knob.


Posted on 15 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos