Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Mitsubishi L200

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Car stereo

Before you can start, sit in the driver's seat of your Mitsubishi L200. Begin by prising off the radio surround using a thin but sturdy tool, then disconnect the rear connectors. By doing this, you will have accessed the screws securing the radio, which you need to remove. Once you have completed this step, you will have freed the radio, which you can then pull out of its housing, reaching the rear connectors. Once you have accessed the rear connectors, disconnect them, and you will have finished the removal.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Timing Belt on the Mitsubishi L 200 MK1
Instructions for Replacing the Timing Belt on the Mitsubishi L 200 MK1
Mitsubishi L 200 (1996-2005 / MK 1) In this guide, you will see the main steps to remove and replace the timing belt on the first generation Mitsubishi L 200. Open the bonnet and start …
How to Access the ECU on the Mitsubishi L 200?
How to Access the ECU on the Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) In this guide, you will find instructions that will allow you to access the engine ECU of the Mitsubishi L 200. First, get in the vehicle on the fron…
How to Replace the External Wing Mirror on a Mitsubishi L 200
How to Replace the External Wing Mirror on a Mitsubishi L 200
Mitsubishi L 200 (2015-2024 / MK 3) Quickly and easily remove and replace the external wing mirror on a Mitsubishi L 200. First, open the front door and start by removing the small plas…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos