|
Do it yourself
| |||
| ||||
How to Easily Remove the Front Bumper of the Mitsubishi Mirage
Model: Mitsubishi Mitsubishi Various
Video tutorial
If you need to remove the front bumper of your Mitsubishi Mirage but don't know how to proceed, just read this mini guide carefully. Before you start, ensure that you have parked the car on a flat surface and engaged the handbrake. And of course, turn off the engine. Next, unlock the front bonnet and lift it fully. At this point, undo the four screws located at the top of the bumper using a 10mm spanner. Do the same with the two screws situated in the centre of the grille and at the bottom of the bumper (in this case, use a 12mm spanner). Finally, remove all the various rubber clips present, and then detach the bumper.
Updated on 9 May 2026 by ScegliAuto
Related tutorials
Mitsubishi Mitsubishi Various
To easily locate the fuse box in the cabin of your Mitsubishi Eclipse (2006-2012), follow the steps in this mini guide. First, switch off the car and…
Mitsubishi Mitsubishi Various
If you own a 2003 Mitsubishi Galant and want to know how to replace the front headlamp bulb, read this guide carefully and follow the instructions. F…
Mitsubishi Mitsubishi Various
In this video tutorial, you will learn how to remove the timing belt from a Mitsubishi, specifically those powered by the 2.4L engine. After removing…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Replace the Front Headlamp Bulb in a Kia Stonic?
Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |