Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Timing Belt on Mitsubishi 2.4L

Model: Mitsubishi Mitsubishi Various
Part: Timing belt

In this video tutorial, you will learn how to remove the timing belt from a Mitsubishi, specifically those powered by the 2.4L engine. After removing some components such as the wheel and the wing, lift the car and loosen the tensioner by unscrewing the bolt, as shown in the video. At this point, you can remove the old belt. The video demonstrates how to remove the other belts (including a pulley) and the water pump along with the cover, in case it is faulty. Follow the video step by step and apply the reverse procedure for reassembly.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Differences in Tension on the Timing Chain of a Mitsubishi Fuso Canter 4P10
Differences in Tension on the Timing Chain of a Mitsubishi Fuso Canter 4P10
Mitsubishi Mitsubishi Various In this video, observe the difference in the timing chain of a Mitsubishi Fuso Canter 4P10 in poor condition due to inadequate maintenance and improp…
How to Remove the Alternator from the Mitsubishi Adventure
How to Remove the Alternator from the Mitsubishi Adventure
Mitsubishi Mitsubishi Various This guide will show you the procedure to remove and replace the alternator of the Mitsubishi Adventure, as well as the Freeca. First, open the bonne…
Where is the fuse box of the Mitsubishi Eclipse?
Where is the fuse box of the Mitsubishi Eclipse?
Mitsubishi Mitsubishi Various To easily locate the fuse box in the cabin of your Mitsubishi Eclipse (2006-2012), follow the steps in this mini guide. First, switch off the car and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos