Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Space

Model: Mitsubishi Mitsubishi Various
Part: Service warning light

To manually reset the service light (or maintenance light) on your Mitsubishi Space, you do not need any diagnostic tools. Just follow these instructions. First, ensure that the car doors are closed, then press the "Start/Stop" button to turn on the instrument panel. At this point, locate and hold down the button inside the speedometer. After a few seconds, release it and repeat the same operation two more times. Finally, turn off and then turn on the instrument panel to complete the reset.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Mitsubishi Space Star?
How to Reset the Tyre Pressure Warning Light on a Mitsubishi Space Star?
Mitsubishi Mitsubishi Various Resetting the low tyre pressure warning light on the new Mitsubishi Space Star is very simple. Let's see how to do it in the attached video tutorial …
How to reset the oil light on the Mitsubishi Space Star
Mitsubishi Mitsubishi Various In this new mini guide, discover a method that is both simple and effective, allowing you to reset the oil change light in your Mitsubishi Space Star…
How to Reset the TPMS Light on the Mitsubishi Space Star
How to Reset the TPMS Light on the Mitsubishi Space Star
Mitsubishi Mitsubishi Various This guide shows how to reset the tyre pressure monitoring system (TPMS) light on the Mitsubishi Space Star. First, turn on the vehicle's ignition. U…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos