Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Mirage
  6. : How do you replace the injectors of the Mitsubishi Mirage?

Mitsubishi Mirage - Video tutorial

Model: Mitsubishi Mirage LA, A00, A10 - Years 2012-2023
Part: Injectors
Operation: How do you replace the injectors of the Mitsubishi Mirage?

In order to replace the injectors of the Mitsubishi Mirage you have to open the hood, so that you have access to the components inside the engine compartment: in the upper part of the engine block, it will be necessary to disconnect the connectors connected to the injectors, so that these can be removed from inside their housing. After the old injectors have been removed, it will be possible to connect the new ones to the relative connectors, inserting them in their housings. After installation you will be able to close the hood and check that everything is working properly.


Posted on 9 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos