Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Mitsubishi Adventure

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

If you need to replace the engine air filter on this vehicle, you can watch the video and read the instructions provided below. Open the bonnet and locate the box containing the filter on the left side.

Remove the clips securing the front air duct and pull it out, then loosen the clips securing the cover to remove it. Next, pull out the filter and replace it with the new one, then reposition the cover and reattach the steel clips.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Mitsubishi Outlander
How to replace the air filter of the Mitsubishi Outlander
Mitsubishi Outlander (2001-2006 / MK 1) The following video tutorial shows us how to replace the air filter of the Mitsubishi Outlander model MK1 on our own. The air filter is located insid…
Replacing Air Filter on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replace the cabin air filter on a Mitsubishi Outlander if you have covered a considerable distance. Open the car door, pull up the engine compartment…
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need guidance on correctly replacing the engine air filter, you are in the right place. Simply read the ins…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos