Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mitsubishi Outlander MK3

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this video, see how to reset the service light on a Mitsubishi Outlander MK3: with the instrument cluster off, repeatedly press the menu button located on the dashboard, on the left side. Press and hold this button for about two seconds.

At this point, the indicator on the instrument cluster will start flashing; while the LED flashes, release the button. Press the button again, wait for the service light to illuminate and for the word CLEAR to appear on the display.

Wait a moment; the new maintenance interval will then appear on the display.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2020 Mitsubishi Outlander?
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
How to Reset the Maintenance Light on a Mitsubishi Outlander
How to Reset the Maintenance Light on a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) In the following article, we will see how to reset the maintenance light on the Mitsubishi Outlander. To reset the light, first start the ignition, t…
How to Reset the Service Light on the Mitsubishi Outlander?
How to Reset the Service Light on the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) To reset the service light on the Mitsubishi Outlander, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos