Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Almera
    4. : Shocks

Nissan Almera - Shocks

Shocks Nissan Almera (2000-2008 / n 16, mk 2)

Nissan Almera (2000-2008 / N16, MK 2)
How to Change the Shock Absorbers on a Nissan Almera
First, remove the wheel on the side where the repair is needed, then lift your vehicle on appropriate jack stands. Also, remove any cables that are near the …Read all…
Posted on 8 March 2026 by ScegliAuto
Nissan Almera (2000-2008 / N16, MK 2)
How to Replace the Front Shock Absorbers on a Nissan Almera
After removing the wheel and lifting your vehicle on appropriate jack stands, if there are any cables near the shock absorber that are attached to it, you will …Read all…
Posted on 8 March 2026 by ScegliAuto
Nissan Almera (2000-2008 / N16, MK 2)
Shock Absorber Removal and Replacement
We all know that shock absorbers play an important role in the comfort of a vehicle as they quickly dampen the oscillations that would occur relying solely on …Read all…
Posted on 13 February 2026 by ScegliAuto
Shocks (3) Antenna (2) Car stereo (5) Body (1) Key (2) Timing belt (2) Air conditioner (1) A/C controls (1) Brake rotors (2) Tail light (1) Air filter (1) Cabin air filter (2) Light bulb (1) Headlight bulb (2) Tail light bulb (1) Handle (1) Engine (2) Power window motor (1) Door trim panel (2) Brake pads (1) Power window switch (1) Instrument cluster (1) Fuse box (8) Door lock (1) Side mirror (1) Rearview mirror (1) Service warning light (1) Windshield wipers (1) Side window (1)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos