Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Almera
    4. : How to change the shock absorbers of the Nissan Almera

Nissan Almera - Video tutorial

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Shock absorbers
Operation: How to change the shock absorbers of the Nissan Almera

As a first operation it will obviously be necessary to remove the wheel on the side on which the repair will have to be carried out, then also raise your car on the appropriate pedestals, then also remove all the cables that pass near the shock absorber and are fixed on it, now you can proceed when removing the bolt that fixes the lower part of the shock absorber, leaving the bolt still stuck between the holes, continue by identifying the point where the shock absorber is blocked on the upper part, then finish removing the lower bolt and you can finally extract the shock absorber.


Posted on 25 September 2023 by ScegliAuto



How to replace front shock absorbers on Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) After having removed the wheel and raised your car on the special pedestals, if there are cables that pass near the shock absorber and are fixed on i
Disassembly and replacement of shock absorbers
Nissan Almera (2000-2008 / N16, MK 2) We all know that shock absorbers play an important role in the comfort of a vehicle as they quickly dampen the oscillations that would be experienced
Remove the door panel of a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Disassembly of the faulty push button panel of a Nissan Almera? Let's see how the panel disassembles from above. With a plastic or metal lever we pry

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos