Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorbers on a Nissan Almera

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Shocks

See other generations:
Video tutorial

After removing the wheel and lifting your vehicle on appropriate jack stands, if there are any cables near the shock absorber that are attached to it, you will need to remove them for easier access. Now, proceed to remove the bolt that secures the lower part of the shock absorber, keeping the bolt in place between the holes.

Next, locate the point where the shock absorber is secured at the top, then finish removing the lower bolt, and you can finally extract the shock absorber.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to replace the front brake discs and pads on a Nissan Almera
How to replace the front brake discs and pads on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) This guide outlines the steps to remove and replace the front brake discs and pads on a Nissan Almera. First, raise the vehicle and remove the front …
How to Change the Shock Absorbers on a Nissan Almera
How to Change the Shock Absorbers on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) First, remove the wheel on the side where the repair is needed, then lift your vehicle on appropriate jack stands. Also, remove any cables that are n…
Where is the fuse box located in the cabin of the Nissan Almera N16?
Where is the fuse box located in the cabin of the Nissan Almera N16?
Nissan Almera (2000-2008 / N16, MK 2) In this new guide aimed at all of you who own a Nissan Almera N16, we will help you find the fuse box in the cabin in just a few seconds. First, get …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos