Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake discs and pads on a Nissan Almera

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Brake rotors

This guide outlines the steps to remove and replace the front brake discs and pads on a Nissan Almera. First, raise the vehicle and remove the front wheel; then, undo the bolts securing the front brake caliper to remove it from the disc, as shown in the video. Next, unscrew the bolts of the brake disc to detach it from the hub, cleaning the caliper of any residual dirt; then install the new disc and subsequently the new front brake pads, following the video tutorial to the end!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing Brake Discs and Pads
Changing Brake Discs and Pads
Nissan Almera (2000-2008 / N16, MK 2) To change the brake pads, first lift the vehicle on a support and remove the wheel from the axle in question. Use a large screwdriver to push the pis…
Where is the fuse box located in the cabin of the Nissan Almera N16?
Where is the fuse box located in the cabin of the Nissan Almera N16?
Nissan Almera (2000-2008 / N16, MK 2) In this new guide aimed at all of you who own a Nissan Almera N16, we will help you find the fuse box in the cabin in just a few seconds. First, get …
Removing the Door Panel on a Nissan Almera
Removing the Door Panel on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video, you will see how to replace the door panel on a Nissan Almera. First, open the door and remove the screws located along the edge of th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos