Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

See other generations:
Video tutorial

Replacing the brake pads is a maintenance task you can easily do yourself, but you must observe some precautions starting with lifting the vehicle; first, before lifting the car, slightly loosen the wheel fastening bolts, then lift the vehicle using a jack in the designated area and apply axle stands; then complete the wheel removal to access the caliper, unscrew the respective fastening bolts to detach it from its support and extract the old pads; clean the sliding plates, insert the new pads, retract the caliper piston using a C-clamp and reassemble the caliper, then remount the wheel, lower the vehicle and complete the tightening of the wheel bolts; pay attention during the first braking.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

…
How to replace the front headlight bulbs in the Nissan Juke?
How to replace the front headlight bulbs in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this tutorial, we can see how to replace the headlights bulbs in the Nissan Juke, an extremely simple and quick operation. First of all, let's mak…
What is the Fuse Diagram for the Nissan Juke?
What is the Fuse Diagram for the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In this video, you can see where the fuse boxes are located in the Nissan Juke and their respective diagrams, useful if you need to check the fuse of…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos