Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Nissan Note

Model: Nissan Note E11, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Today we will explain how to replace the rear headlight bulb of the Nissan Note produced from 2004 to 2013. To replace the bulb, we need to open the trunk and use a 10mm key to remove the screws along the side bar of the headlight. Remove the headlight, being careful not to damage the connector.

Disconnect the headlight connector and open the light fixture to proceed with the bulb replacement. Remove the internal part of the headlight to clean it from dirt.

After inserting the bulb, we can mount the headlight and connect the connector. After screwing in the screws, we can close the trunk and test the functioning of the lights.


Posted on 23 December 2024 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Nissan Note
Nissan Note (2004-2013 / E11, MK 1) In this video tutorial, you will learn how to remove and replace the front headlamp bulb on a Nissan Note by following these simple and quick steps. …
How to Replace the Fog Light Bulb in the Nissan Note?
How to Replace the Fog Light Bulb in the Nissan Note?
Nissan Note (2012-2022 / MK 2, E12) To change the fog light bulb in the Nissan Note, first turn the wheel inwards to create more working space. Remove the wheel arch liner, reach in, an…
How to Replace a Brake Light Bulb on a Nissan Note
How to Replace a Brake Light Bulb on a Nissan Note
Nissan Note (2004-2013 / E11, MK 1) To replace a brake light bulb on a Nissan Note, follow these simple instructions. First, open the boot and remove the two screws from the light unit …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos