Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the car radio of the Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the original radio of the Nissan X-Trail, in simple steps. First, we get into the car and start removing the plastic covers on the top and bottom of the radio, then also removing the air conditioning controls; now we unscrew the radio screws and disconnect the wiring at the back, as shown in the video.

At this point, we install the new radio, making any necessary wiring modifications, following the video tutorial to the end!


Posted on 31 January 2025 by ScegliAuto


Related tutorials

Removing the Radio from a Nissan X-Trail
Removing the Radio from a Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) .. How to remove the radio from a Nissan X-Trail? Let’s see how to take it out from inside the car's dashboard. Remove the radio trim surround u.. …
How to Remove the Radio from a Nissan X-Trail
How to Remove the Radio from a Nissan X-Trail
Nissan X Trail (2014-2023 / MK 3, T32) .. sit in the front passenger seat of your Nissan X-Trail. Begin by unclipping and removing the insert on the dashboard in front of the passenger seat, using.. …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) .. guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of the vehicle... …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos