Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of bushings and stabilizer bar links of the front stabilizer of the Nissan Juke.

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Bushings

In this video we can see how it is possible to replace the bushings and the struts of the front stabilizer of the Nissan Juke. It is a time-lapse video; it does not teach us how to do it, but simply shows us how it can be done. First, the car must be lifted, and the wheels removed entirely; we clean thoroughly with a wire brush all the parts that need to be removed and then remove the bushings using a screwdriver. We clean the brackets well with the brush and with WD-40. We lubricate the parts well with copper grease, and reassemble the new parts on both sides.

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of a 2012 Nissan Juke.
How to replace the front headlight bulb of a 2012 Nissan Juke.
Nissan Juke (2010-2019 / MK 1) In the following video tutorial, we are shown how to replace the front headlight bulb of the 2012 Nissan Juke. To perform the replacement, we need to…
How to Replace the Headlamp Bulb on a Nissan Juke
How to Replace the Headlamp Bulb on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the headlamp bulb on a Nissan Juke, open the bonnet to access the components inside the engine bay. You need to disconnect the air duct to…
Reset Service Light on Nissan Juke
Reset Service Light on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Do you want to reset the maintenance light on a Nissan Juke? Here’s how to proceed with the reset of the Nissan Juke car light. Turn on the instrumen…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos