Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to remove the rear door panel on Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Door panel
Operation: How to remove the rear door panel on Nissan Micra

How to remove the rear door panel (left side) on a Nissan Micra? Let's see how to proceed: before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Remove the plastic from the handle and the door opening lever with a lever, then, with a screwdriver, unscrew the tightening screws placed on the plastic panel. Once all the screws have been removed, with the lever we remove the window lifter crank, remove all the plastic clips that block the door. We remove the door panel by hand, unhook any power supply terminals and release cable.


Posted on 24 October 2023 by ScegliAuto



How do you replace the rear hatch lock of the Nissan Micra?
Nissan Micra (2002-2010 / K12) The replacement of the rear door lock of the Nissan Micra is done by opening the door, so that the internal plastic panel can be located: this must b
How do I remove the Nissan Micra door panel?
Nissan Micra (2010-2017 / K13) In order to remove the Nissan Micra door panel, you need to unscrew the bolt located next to the window control panel, so that the entire cover can b
How to remove the door panel on the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this tutorial, we can see how to disassemble the door panel in the Nissan Micra, an extremely simple and fast operation. First of all, make sure t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos