Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to remove the door panel on a Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Door panel
Operation: How to remove the door panel on a Nissan Micra

How to remove the door panel on a Nissan Micra? This video explains how to proceed. Before starting the disassembly work, let's disconnect the battery terminals located in the front engine compartment. With a lever or screwdriver we go to leverage the handle located on the door panel, detach it and disconnect the terminals of the window lifter push-button panel. With a fixed screwdriver we unscrew the screws on the panel, with the plastic lever we release all the clips by levering around the entire perimeter of the door. Finally, we pull the panel away by grabbing it with our hands, (we unhook the cable of the opening lever, the clamps of the window lifters and the speakers). Let's reassemble everything by proceeding backwards.


Posted on 7 October 2023 by ScegliAuto



How to remove the door panel on the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this tutorial, we can see how to disassemble the door panel in the Nissan Micra, an extremely simple and fast operation. First of all, make sure t
Where is the fuse box on the 2016 Nissan Micra
Nissan Micra (2010-2017 / K13) If you want to locate the fuse box of your 2016 Nissan Micra yourself, just read the following instructions carefully and put them into practice. Fir
How to remove the door panel on Nissan Micra
Nissan Micra (1992-2002 / K11) How to remove the door panel (right side) on a Nissan Micra? With a lever or screwdriver we go to leverage the handle on the door panel, detach it an

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos