Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : How to remove the exterior handle of the Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Handle
Operation: How to remove the exterior handle of the Nissan Micra

Remove the external door handle? Let's see the disassembly of the door handle of a Nissan Micra. We unscrew the screws on the cladding panel with a screwdriver, remove the internal opening handle. We detach the panel and disconnect the electrical cables. Once the panel has been removed, all we have to do is remove the door opening handle. We disassemble the handle from the inside of the door and hold the outside handle with the left hand Unscrew the tightening screws). We assemble the new handle and screw the tightening screws of the same. We fasten the door cover panel.


Posted on 16 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos