Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the external handle of the front door of the Nissan Micra.

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Handle

See other generations:
Video tutorial

The following steps will allow us to disassemble and replace the external handle of the front door of the Nissan Micra. First, we open the front door of the car and start by removing the plastic side cap; then we unscrew the screw inside it, removing the rectangular cover of the handle and then the remaining part, as shown in the video.

At this point, we install the new door handle, fixing it properly; in the case of the driver's side handle, we will install the lock cylinder, finally fixing the side screw.


Posted on 12 August 2025 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Nissan Micra
How to Remove the Front Door Panel of a Nissan Micra
Nissan Micra (2017-2024 / K14) Here are the steps to remove the front door panel of a Nissan Micra. First, open the front door and unscrew all the fixing screws located on the side…
How to Remove the Front Door Panel of the Nissan Micra K12
How to Remove the Front Door Panel of the Nissan Micra K12
Nissan Micra (2002-2010 / K12) Today, let's discover the procedure for removing and replacing the front door panel of the Nissan Micra, following the instructions below. First, ope…
Removing the Door Panel from the Nissan Micra K12
Removing the Door Panel from the Nissan Micra K12
Nissan Micra (2002-2010 / K12) In today's video, see the steps to remove the front door panel from the Nissan Micra K12. First, open the front door and start by removing the plasti…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos