Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake pads of the Nissan Rogue

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

Today we will discover the information that will allow us to disassemble and replace the brake pads of the Nissan Rogue, in simple steps. First, lift the vehicle and start by removing the wheel, unscrewing the bolts; then unscrew the screws of the brake caliper, applying pressure on the caliper piston to remove it from the disc, as shown in the video.

At this point, remove the old brake pads, replacing them with new ones (installing the original ones); clean the caliper from the residual dirt and finally reassemble the brake caliper and the wheel!


Posted on 7 May 2025 by ScegliAuto


Related tutorials

Replace the Rear Brake Pads on the Nissan Rogue
Replace the Rear Brake Pads on the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In today's tutorial video, you will learn how to remove and replace the rear brake pads on the Nissan Rogue. First, raise the vehicle and start by re…
How to Replace the Front Brake Pads on the Nissan Rogue T32
How to Replace the Front Brake Pads on the Nissan Rogue T32
Nissan Rogue (2014-2020 / T32) This guide shows how to replace the front brake pads on the Nissan Rogue T32. The first step is to remove the wheel on the side you are working on an…
How to Check the Brake Fluid Level on a Nissan Rogue
How to Check the Brake Fluid Level on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) Checking the brake fluid level on a Nissan Rogue (or Qashqai, which is essentially the same vehicle) is very simple, as the fluid reservoir is clearl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos