Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Nissan Rogue T32

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

This guide shows how to replace the front brake pads on the Nissan Rogue T32. The first step is to remove the wheel on the side you are working on and lift the vehicle securely; use a 21 mm wrench to remove the wheel bolts. Next, you need to remove the two 14 mm bolts securing the caliper to the rotor and set it aside, being careful with the hydraulic lines.

Now you can remove the old pads by simply sliding them out of the brackets. Compress the caliper piston back to its retracted position to allow for the installation of the new pads.

Clean the surfaces with compressed air or a suitable spray and install the new brake components, adding specific lubricant to prevent squeaking. Reinstall the brake caliper and the tire.

Check the brake operation before hitting the road.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Replace the Rear Brake Pads on the Nissan Rogue
Replace the Rear Brake Pads on the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In today's tutorial video, you will learn how to remove and replace the rear brake pads on the Nissan Rogue. First, raise the vehicle and start by re…
How to replace the brake pads of the Nissan Rogue
How to replace the brake pads of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Today we will discover the information that will allow us to disassemble and replace the brake pads of the Nissan Rogue, in simple steps. First, lift…
How to Replace the Front Brake Pads on a Nissan Rogue?
How to Replace the Front Brake Pads on a Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To replace the front brake pads on a Nissan Rogue, lift the vehicle so that the corresponding wheel is not in contact with the ground. This will allo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos